Phoenix MINI MCR-2-RPSS-I-2I-feed isolator 2905628, pluggable 4-terminal power multiplier. HART transparent, 0(4) mA ... 20 mA input signal, 0(4) mA ... 20 mA output signal. The device can be used in both signal and power multiplier modes. Screw connection technology.
| Product Type | Feeder Isolator |
| Product Series | MINI Analog Pro |
| Channels | 2 |
| Model | isolation amplifier |
| configuration | DIP switch |
| insulation characteristics: GB Standard | |
| Overvoltage Category | II |
| pollution level | 2 |
| electrical isolation | 4 road isolation |
| cut-off frequency (3dB) | > 1 kHz |
| Signal Transmission Behavior | In = Out |
| step response (10-90%) | < 400 µs |
| maximum temperature coefficient | 0.0075 %/K |
| Maximum transmission error | ≤ 0.05 % (final value 20 mA) |
| Electrical isolation input/output/power supply | |
| Rated insulation voltage | 300Vrms |
| Test Voltage | 3 kV AC (50 Hz, 60 s) |
| insulation | reinforced insulation conforming to IEC/EN 61010-1 |
| Power | |
| Rated supply voltage | 24V DC |
| Supply Voltage Range | 9.6V DC ... 30V DC (DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, order number 2869728) can be used to bridge the power supply. Can be stuck to a 35mm DIN rail conforming to the EN60715 standard)) |
| Typical current consumption | 40 mA (for 24V DC and signal multiplier mode) |
| 65 mA (for 24V DC and power multiplier mode) | |
| 75 mA (for 12V DC and signal multiplier modes) | |
| 130 mA (for 12V DC and power multiplier modes) | |
| power consumption | 1.6W (IOUT= 20 mA,500 Ω load) |
| signals: current | |
| Input Description | sensor circuit |
| Input Number | 1 |
| current input signal | 0 mA ... 20 mA (signal multiplier mode) |
| 4 mA ... 20 mA (power supply and signal multiplier mode) | |
| input current | 90 Ω (+1.6 V) |
| Transmitter supply voltage | > 19.5V |
| signals: current | |
| outputs | 2 |
| No-load voltage | < 20V |
| current output signal | 0 mA ... 20 mA (signal multiplier mode) |
| 4 mA ... 20 mA (power supply and signal multiplier mode) | |
| Maximum current output signal | 25 mA |
| load/output load current output | ≤ 500 Ω (per channel) |
| fluctuation | < 20 mVSS(500 Ω) |
Phoenix MINI MCR-2-RPSS-I-2I-Feed Isolator 2905628
