Phoenix FL WLAN 1120-wireless module 1386091,WLAN client, software access point, Wi-Fi 6, with internal antenna (MIMO) for single hole installation, IP66/68,-30°C ... 60°C,WLAN 802.11 a, B, g,n,ax,ax frequency: 2.4 GHz, 5 GHz, interface data: 9V DC ... 32V DC,RJ45: for LAN,http/https,CLI,REST API
| Product Type |
Wireless Module |
| type |
Stand-Alone |
| insulation characteristics |
| Overvoltage Category |
II (IEC 61010-1) |
| Wireless Network Card |
| Model |
IEEE 802.11 a/ B /g/n/ac/ax 2,4 GHz, 5 GHz > 600 MBit/s |
| Assembly Instructions |
permanent installation |
| rated conditions |
4.1W |
| Test section |
24V power supply/functional ground 500V DC 1 min |
| Ethernet interface/all other potentials 2.25 kV DC 1 min |
| power supply: electronic module |
| connection system |
COMBICON |
| Connection Mode |
In-line spring connection |
| Connection Method Considerations |
recommend conductor cross section: 0.75 mm² |
| recommend casing: connection length 10mm |
| recommend crimping pliers: trapezoidal or square |
| Name |
1966101 FMC 1,5/ 3-STF-3,5 |
| Bits |
3 |
| cross-section range AWG |
24 ... 16 |
| supply voltage |
24V DC (SELV) |
| Supply Voltage Range |
9V DC ... 32V DC (PELV/SELV) |
| supply current |
Typical 170 mA (Unom/ 20°C/Max Data Flow) |
| power consumption |
maximum 620 mA (at Umin/Tmax/maximum data flow) |
| 1966101 FMC 1,5/ 3-STF-3,5 |
| Connection Mode |
In-line spring connection |
| Hard Wire Cross Section |
0.2 mm² ... 1.5 mm² |
| Flexible Wire Cross Section |
0.2 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG |
24 ... 16 |
| stripping length |
10mm |
| Antenna |
| number. |
2 |
| Connection Mode |
permanent installation |
| Connection Method Considerations |
MIMO |
| gain |
5 dBi |
| Function |
| configuration |
web-based management, automation CLI,REST API |
| Quality of Service (QoS) |
is |
| Radio (Wireless) Certification |
Europe, more countries to see online stores |
