Phoenix IB IL 230 PWR IN-PAC-power module 2861535,Inline power module, with accessories (plug-in connector and marker board), without fuse, 230V AC
| width | 36.6mm |
| height | 119.8mm |
| depth | 71.5mm |
| Application Description | |
| Application Description | for industrial applications only |
| Inline Local Bus | |
| interfaces | 2 |
| Connection Mode | Inline Data Bridge Block |
| transmission speed | 500 kBit/s / 2 MBit/s |
| Module | |
| ID Code (dec.) | none |
| Hex ID Encoding | None |
| Register Length | 0 Byte |
| the required parameter data | 0 Byte |
| 0 Byte | |
| Product Type | I/O components |
| product series | Inline |
| type | Module |
| special nature | 230V AC |
| insulation characteristics | |
| protection level | I (IEC 61140, EN 61140, VDE 0140-1) |
| rated conditions | 0W |
| Test section | 5V supply to remote bus/7.5V supply (bus logic) 500V AC 50Hz 1 min |
| 5V supply, out to remote bus/7.5V supply (bus logic) 500V AC 50Hz 1 min | |
| 7.5V power supply (bus logic)/I/O area 120V AC 2500V AC 50Hz 1 min | |
| regular test 1200V AC 50Hz 1 min | |
| I/O area 120V AC/PE 500V AC 50Hz 1 min | |
| output/phase 500V AC 50Hz 1 min | |
| protection circuit | surge protection |
| Power | |
| I/O voltage | 230V AC |
| Peripheral Voltage Range | 207V AC ... 253V AC (includes all tolerances, including ripple) |
| residual wave | ± 23V |
| Maximum current consumption | 8 A |
| potential: I/O power supply | |
| supply voltage | 230V AC (via Inline connector) |
| Supply Voltage Range | 207V AC ... 253V AC |
| connection technology | |
| Connection Name | Inline connector |
| Wire Connection | |
| Connection Mode | pull-back spring connection |
| Rigid conductor cross section | 0.08 mm² ... 1.5 mm² |
| Flexible Wire Cross Section | 0.08 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG | 28 ... 16 |
| stripping length | 8mm |
| Inline connector | |
| Connection Mode | pull-back spring connection |
| Hard Wire Cross Section | 0.08 mm² ... 1.5 mm² |
| Flexible Wire Cross Section | 0.08 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG | 28 ... 16 |
| stripping length | 8mm |