Phoenix FL CAT5 PATCH 1,0-Tail cable 2832276, Tail cable, CAT5, pre-installed, 1 m
| Product Type |
Pre-installed data cable |
| product series |
RJ45 STANDARD CAT5 |
| Sensor Type |
Ethernet |
| Bits |
8 |
| Connection Chart |
RJ45 |
| Shielding |
have |
| insulation characteristics |
| Overvoltage Category |
I |
| pollution level |
1 |
| Rated voltage (III/2) |
150V |
| contact resistance |
≤ 0.003 Ω (IEC 60603-7) |
| Rated voltage UN |
150Vrms |
| Rated current IN |
1.5 A |
| transmission speed |
1 Gbps |
| transmission rate |
1 GBit/s |
| wave impedance |
100 Ω |
| Mechanical parameters |
| the insertion force of each signal contact |
30.00 N |
| pull-out force for each signal contact |
50 N |
| flame retardant rating to UL 94 |
V0 |
| outer sheath, material |
LSFROH |
| Wire Material |
copper stranded wire |
| width |
12.6mm |
| height |
6.6mm |
| length |
40.05mm |
| External dimensions |
| maximum outer diameter |
6.2mm |
| connection 1 |
| type |
plug straight head RJ45 |
| Shielding |
have |
| Insertion/unplugging cycle |
≥ 750 |
| protection level |
IP20 |
| Connection 2 |
| type |
plug straight head RJ45 |
| Cable Length |
1.00 m |
| Cable outer diameter |
5.50mm |
| outer sheath, material |
LSFROH |
| Single wire, stranded wire quantity |
8 |
| single strand, material |
copper stranded wire |
| single strand, cross-sectional area |
0.14 mm² |
| Cable cross-sectional area |
0.14 mm² |
| Wire Material |
copper stranded wire |
| Twisted Pair |
is |
| Twisted Pair Shielding Type |
None |
| Total Strand |
Twisted Pair |
| Shielding |
SF/UTP |
| Core test voltage/core |
1 kV DC (1 minute) |
| core test voltage/shield |
1.00 kV DC (1 min) |
| Cable test voltage |
1 kV DC (1 minute) |
| wave impedance |
100 Ω |
| minimum bending radius, fixed mounting |
30mm |
| smoke concentration |
Complies with IEC 61034 |
| flame retardant |
conforming to IEC 60332-3C |
| environmental conditions |
| protection level |
IP20 |
| ambient temperature (operation) |
-10°C ... 60°C |
