Phoenix FLK 40-PA/EZ-DR/HF/KS/3000/YUC-card front adapter 2904649, cast front adapter, with prefabricated halogen-free round cable, each end has a 40-position plastic European plate slot connector, Used to connect the Yokogawa controller. Cable length: 30.0 m

Product Type Card Front Adapter

Nominal operating voltage (DC) ≤ 30V DC
Rated operating mode 100% Eligible
current (per path) ≤ 500 mA (released)
Supported Controller YOKOGAWA CS3000 CentumVP
Applicable I/O Card AAI543
AAI141
AAI143
AAI835
AAI841
AAI135
AAR181
AAT141
AAV141
AAV142
AAB841
AAV542
Applicable I/O Card NFAI543
NFAI141
NFAI143
NFAI835
NFAI841
NFAI135
NFAV141
NFAV142
NFAB841
NFAV542
Applicable I/O Card SAI143
SAV144
SAI533

connection 1
connection meets standards IEC 60603-13 (compliance)
Connection Mode Yokogawa,I/O card compatible
connection quantity 1
Bits 40
Tightening torque 0.5 Nm (screw connection)
Insertion/unplugging cycle > 50
needle pitch 2.54mm
Connection 2
connection meets standards IEC 60603-13 (compliance)
Connection Mode Yokogawa,KS compatible
connection quantity 1
Bits 40
Tightening torque 0.5 Nm (screw connection)
Insertion/unplugging cycle > 50
needle pitch 2.54mm

cable
length 30 m

UL AWM 21946
Bits 40
Shielding have
Wire Model prefabricated shield
wire structure signal line 7x 0.16mm
AWG, signal wire 26
Wire Cross Section 40x 0.14 mm²
wire diameter, including insulation 1 mm ± 0.03mm
Cable outer diameter 9.80mm ± 0.4mm
outer sheath, material Halogen-free sheath
outer sheath, color Grey
Wire Material tinned copper stranded wire
Cable resistance ≤ 145 Ω/km
insulation resistance ≥ 20 MΩ*km
minimum bending radius, fixed mounting 102mm
minimum bending radius, mobile installation 184mm
Dynamic Load Capacity (Bending) Maximum bending times: 5000
2314299

Phoenix FLK 40-PA/EZ-DR/HF/KS/3000/YUC-Card Front Adapter 2904649

Product Center

PRODUCT CENTER