Phoenix SAC-4P- 5,0-800/M12FR-sensor/actuator cable 1456970, sensor/actuator cable, 4-position, PUR halogen-free, solder splash-proof, high flexibility, gray RAL 7001, free Outlet, with hole elbow M12, code: A, cable length: 5 m, used for manipulator and cable drag chain

Product Type Sensor/Actuator Cable
Application manipulator and cable drag chain
Bits 4
Outlet No. 1
Shielding None
coding A
insulation characteristics
Overvoltage Category II
pollution level 3

flame retardant rating, according to UL 94 HB
sealing material NBR
Fixture body material TPU, high flame retardancy, self-extinguishing properties
Contact Material CuSn
Material Contact Surface Ni/Au
Contact Carrier Material TPU GF
screw connection material zinc cast, nickel plated

insulation resistance ≥ 10 MΩ
Rated voltage UN 250V AC
250V DC
Rated current IN 4 A

Mechanical parameters
Insertion/unplugging cycle ≥ 100

Status Display None
Status Display No

Wire Connection
Tightening torque 0.4 Nm (M12 plug connector)

connection 1
type Free Outlet
Connection 2
type Hole Elbow M12
Bits 4
Error-proofing code type A

Cable Length 5 m
gray, highly flexible PUR [800]
Dimensional drawing
Considerations the outer sheath of this cable is extremely strong, it can only be stripped in 5cm increments.
Cable Weight 33.5 kg/km
UL AWM 20549
Bits 4
Shielding None
Cable Type gray, highly flexible PUR [800]
wire structure signal line 42x 0.10mm
AWG, signal wire 22
Wire Cross Section 4x 0.34 mm² (signal line)
wire diameter, including insulation 1.3mm ± 0.05mm (signal line)
Cable outer diameter 4.80mm ± 0.2mm
outer sheath, material PUR
outer sheath, color gray RAL 7001
Wire Material copper stranded wire
wire insulation material PP
single line, color Brown, white, blue, black
Total Strand 4 wire, stranded
Maximum conductor resistance approx. 53 Ω/km
insulation resistance ≥ 20 MΩ*km
Rated voltage, cable 300V
Test Voltage 2000V
minimum bending radius, fixed installation 4 x D
minimum bending radius, movable installation 7,5 x D
minimum bending radius, fixed mounting 20mm
minimum bending radius, mobile installation 36mm
Dynamic Load Capacity (Bending) Maximum bending times: 1000000, bending radius: 7,5 x D, lateral trajectory: 5 m, lateral speed: 3.3 m/s, acceleration: 5 m/s
Maximum bending times: 150000, Bending radius: 50mm, Transverse trajectory: 0.9 m, Transverse speed: 5 m/s, Acceleration: 30 m/s
dynamic load capacity (torsional) torque: ± 360 °/m, torsion cycle: 1000000, torsion frequency: 35 times/min
Halogen-free according to DIN VDE 0472 Chapter 815
flame retardant Complies with UL 758/1581 FT2
oil resistance according to DIN EN 60811-2-1
Other protective functions good resistance to acid, alkali solution and solvent
does not contain silicone
special nature cable sheath welding is spark resistant, recyclable, matt, low adhesion, abrasion resistant, flame retardant, and self-extinguishing
is free of silicon and cadmium
without substances affecting the paint coating
ambient temperature (operation) -40°C ... 80°C (cable, fixed installation)
-25°C ... 80°C (cable, movable installation)
1694169

Phoenix SAC-4P- 5,0-800/M12FR-Sensor/Actuator Cable 1456970

Product Center

PRODUCT CENTER