Phoenix PACT RCP-D190-Coil 2904 892,600mm long Rogowell coil. The diameter of the measuring coil after installation is 190mm. The Rogowell coil is used for AC current measurement of the bus bar and power cable.
| Product Type | Rogowii coil |
| kit includes | 2904923 PACT RCP-4000A-1A-D190 |
| insulation characteristics | |
| pollution level | 2 |
| measuring coil | |
| wire structure signal line | 2x 0.22mm (signal wire (tinned)) |
| 1x 0.22mm (shielded wire (tinned)) | |
| insulation | double insulation |
| Rated insulation voltage | 1000V AC (rms CAT III) |
| 600V AC (rms CAT IV) | |
| Test Voltage | 10.45 kV DC (60 seconds) |
| Accuracy | 0.2 (IEC 61869-10: A1) |
| Overview | |
| Converter Type | Rogowii coil |
| frequency | |
| Name | measuring coil |
| Frequency measurement range | 40Hz ... 20000Hz |
| current transformer | |
| Converter Type | Rogowii coil |
| signal | |
| Name | measuring coil |
| output signal (at 50Hz) | 100 mV (no load, 1000 A) |
| output voltage (no-load operation) | VOUT= M * dI/dt |
| output voltage (sinusoidal, no-load operation) | 100 mV (VOUT= 2 * & pi; * M * f * I(M = 0.318 μH; example: 50Hz;I = 1000 A)) |
| measuring coil | |
| length | 600mm |
| diameter | 8.3mm ± 0.2mm |
| measuring coil after installation | |
| diameter | 190mm |
| signal line | |
| length | 3 m |
| Shell Material | PC |
| Coil Material | Elastollan |
| environmental conditions | |
| Measurement coil protection level | IP54 (not UL certified) |
| ambient temperature (operating) (measuring coil) | -30°C ... 80°C (measuring coil) |
| ambient temperature (storage/transport) | -40°C ... 80°C (measuring coil) |
| elevation | < 2000 m |
| Allowable humidity (operating) | 5%... 95% (non-condensing) |
Phoenix PACT RCP-D190-Coil 2904892
