Phoenix MCR-SL-S- 16-SP- 24-Current monitoring 2864464,MCR contactor for sinusoidal AC 0 ... 16A AC/1 Wechsler
| Use Restrictions | |
| EMC Description | EMC: Class A products, see the manufacturer's declaration in the download area |
| Product Type | Current transmitter |
| insulation characteristics | |
| Overvoltage Category | III |
| pollution level | 2 |
| Rated insulation voltage | 300V AC (ground) |
| total error | ≤ 1.4 % (temperature range) |
| Measurement Level | III |
| test voltage, input/output | 3.5 kV (50 Hz,1 min) |
| test voltage, input/power supply | 3.5 kV (50 Hz,1 min) |
| protection circuit | surge protection; 33V suppressor diode |
| step response (10-90%) | 40 ms |
| maximum temperature coefficient | < 0.02 %/K |
| power supply | |
| Supply Voltage Range | 20V DC ... 30V DC |
| Maximum current consumption | < 30 mA |
| measurement: | |
| Frequency measurement range | 45Hz ... 60Hz |
| measurement | |
| Input current range | 0 A AC ... 16 A AC (Permissible continuous overload: 120%) |
| Overload | 2xIN (sustained) |
| Rated frequency fN | 50Hz |
| 60Hz | |
| Frequency measurement range | 45Hz ... 65Hz |
| Curve Type | Sine |
| switching: relay | |
| Contact Type | 1 changeover contact |
| Contact Material | AgSnO, hard gold plating |
| maximum switching voltage | 30V AC |
| 36V DC | |
| 250V AC (when the gold plating layer is damaged) | |
| limit continuous current | 50 mA (gold-plated, 30V AC/36V DC) |
| 2 A (250V AC if the gold plating is damaged) | |
| response delay | Typical 0.1 s ... 10 s (adjustable via potentiometer) |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Connectable Guide Cross Section AWG | 24 ... 14 |
| Connection Mode | perforated connection |
| Product Size | |
| width | 22.5mm |
| height | 99mm |
| depth | 114.5mm |
| Round wire | |
| diameter | 4.2mm |
Phoenix MCR-SL-S- 16-SP- 24-Current monitoring 2864464
