Phoenix MINI MCR-2-2I-2I-ILP-PT-passive isolator 2901997, dual-channel input loop-powered 2-way isolator, using in-line connection technology, used for galvanic isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. In-line connection technology.
| Product Type | isolation amplifier |
| Product Series | MINI Analog Pro |
| Channels | 2 |
| Model | isolation amplifier |
| insulation characteristics: GB Standard | |
| Overvoltage Category | II |
| pollution level | 2 |
| electrical isolation | 2 road isolation |
| galvanic isolation between input and output | is |
| cut-off frequency (3dB) | 100Hz |
| signal transmission behavior | In = Out |
| maximum temperature coefficient | ≤ 0.002 %/K (measured value/100 Ω load) |
| Maximum transmission error | ≤ 0.1 % (of terminal value) |
| additional error, depending on the load | < 0.075 % (measured value/100 Ω load) |
| electrically isolated input/output | |
| Rated insulation voltage | 300Vrms |
| Test Voltage | 3 kV AC (50 Hz, 60 s) |
| insulation | reinforced insulation conforming to IEC/EN 61010-1 |
| power supply | |
| Supply Voltage Range | 9.6V DC ... 30V DC (loop powered, no external power supply required) |
| power consumption | 600 mW |
| signals: current | |
| Input Number | 2 |
| configurable/programmable | No |
| current input signal | 0 mA ... 20 mA |
| 4 mA ... 20 mA | |
| response current | approx. 200 & micro;A |
| Input Voltage Limit | 30V |
| voltage loss | 3.1V (I = 20 mA) |
| signals: current | |
| outputs | 2 |
| configurable/programmable | No |
| current output signal | 0 mA ... 20 mA |
| 4 mA ... 20 mA | |
| load/output load current output | < 600 Ω (I = 20mA output signal) |
| Connection Mode | in-line connection |
| stripping length | 10mm |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² (with cold press head) |
| 0.14 mm² ... 2.5 mm² (without cold head) | |
| Flexible Wire Cross Section | 0.14 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 12 (flexible) |
| Explosion-proof installation (EPL) | Gc |
| Div. 2 |
| width | 6.2mm |
| height | 109.81mm |
| depth | 119.2mm |
Phoenix MINI MCR-2-2I-2I-ILP-PT-Passive Isolator 2901997
