Phoenix MINI MCR-2-CVCS-constant voltage power supply 2902064, constant voltage/current source, using plug-in connection technology, input voltage: 9.6V DC ... 30V DC. Settable output voltage: 1.25V ... 10V DC or output current: 2.5 mA ... 20 mA. Configurable via DIP switch. Screw connection technology.

Product Type constant voltage power supply
Product Series MINI Analog Pro
configuration DIP switch
insulation characteristics: GB Standard
Overvoltage Category II
pollution level 2

Function
configuration DIP switch

maximum temperature coefficient < 0.01 %/K
Maximum transmission error ≤ 0.1 % (of terminal value)
Electrical isolation input/output/power supply
Rated insulation voltage 300Vrms
Test Voltage 3 kV AC (50 Hz, 60 s)
insulation reinforced insulation conforming to IEC/EN 61010-1
power supply
Supply Voltage Range 9.6V DC ... 30V DC (DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, order number 2869728) can be used to bridge the power supply. Can be stuck to a 35mm DIN rail conforming to the EN60715 standard))
Typical current consumption < 42 mA (24V DC)
< 85 mA (12V DC)
power consumption < 1.1W (9.6V DC)

signals: voltage
voltage input signal 9.6V DC ... 30V DC

signal: current/voltage
configurable/programmable is
Maximum voltage output signal 10V DC
8.75V DC
7.5V DC
6.25V DC
5V DC
3.75V DC
2.5V DC
1.25V DC
Maximum current output signal 20 mA
17.5 mA
15 mA
12.5 mA
10 mA
7.5 mA
5 mA
2.5 mA
short-circuit current > 32 mA
lead broken 13.5V
output current ≤ 30 mA
load/output load current output ≤ 600 Ω (20 mA)
fluctuation < 20 mVSS(at 600 Ω)
ripple current 40 &micro;APP

Connection Mode screw connection
stripping length 10mm
thread M3
Rigid conductor cross section 0.2 mm² ... 1.5 mm² (with cold press head)
2902040

Phoenix MINI MCR-2-CVCS-Constant Voltage Power Supply 2902064

Product Center

PRODUCT CENTER