Phoenix MINI MCR-2-CVCS-PT-constant voltage power supply 2902065, constant voltage/current source, using plug-in connection technology, input voltage: 9.6V DC ... 30V DC. The output voltage can be set: 1.25V DC ...10V DC, or the output current: 2.5 mA ... 20 mA. Configurable via DIP switch. Plug-in connection technology.
| Product Type | constant voltage power supply |
| Product Series | MINI Analog Pro |
| configuration | DIP switch |
| insulation characteristics: GB Standard | |
| Overvoltage Category | II |
| pollution level | 2 |
| Function | |
| configuration | DIP switch |
| maximum temperature coefficient | < 0.01 %/K |
| Maximum transmission error | ≤ 0.1 % (of terminal value) |
| Electrical isolation input/output/power supply | |
| Rated insulation voltage | 300Vrms |
| Test Voltage | 3 kV AC (50 Hz, 60 s) |
| insulation | reinforced insulation conforming to IEC/EN 61010-1 |
| Power | |
| Supply Voltage Range | 9.6V DC ... 30V DC (DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, order number 2869728) can be used to bridge the power supply. Can be stuck to a 35mm DIN rail conforming to the EN60715 standard)) |
| Typical current consumption | < 42 mA (24V DC) |
| < 85 mA (12V DC) | |
| power consumption | < 1.1W (9.6V DC) |
| signals: voltage | |
| voltage input signal | 9.6V DC ... 30V DC |
| Transmitter supply voltage | 10V |
| signals: voltage | |
| configurable/programmable | is |
| Maximum voltage output signal | 10V DC |
| 8.75V DC | |
| 7.5V DC | |
| 6.25V DC | |
| 5V DC | |
| 3.75V DC | |
| 2.5V DC | |
| 1.25V DC | |
| Maximum current output signal | 20 mA |
| 17.5 mA | |
| 15 mA | |
| 12.5 mA | |
| 10 mA | |
| 7.5 mA | |
| 5 mA | |
| 2.5 mA | |
| short-circuit current | > 32 mA |
| lead broken | 13.5V |
| output current | ≤ 30 mA |
| load/output load current output | ≤ 600 Ω (20 mA) |
| fluctuation | < 20 mVSS(at 600 Ω) |
| ripple current | 40 µAPP |
| Connection Mode | in-line connection |
| stripping length | 10mm |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² (with cold press head) |
| 0.14 mm² ... 2.5 mm² (without cold head) | |
| Flexible Wire Cross Section | 0.14 mm² ... 2.5 mm² |
Phoenix MINI MCR-2-CVCS-PT-Constant Voltage Power Supply 2902065
