Phoenix FLK 40-PA/EZ-DR/KS/1000/YUC-card front adapter 2314370, cast front adapter, with prefabricated round cable, each end has a 40-position plastic European plate slot connector, Used to connect to Yokogawa controller. Cable length: 10.0 m
Product Type
Card Front Adapter
Nominal operating voltage (DC)
≤ 30V DC
Rated operating mode
100% Eligible
current (per path)
≤ 500 mA (released)
Supported Controller YOKOGAWA CS3000 CentumVP
Applicable I/O Card
AAI543
AAI141
AAI143
AAI835
AAI841
AAI135
AAR181
AAT141
AAV141
AAV142
AAB841
AAV542
Applicable I/O Card
NFAI543
NFAI141
NFAI143
NFAI835
NFAI841
NFAI135
NFAV141
NFAV142
NFAB841
NFAV542
Applicable I/O Card
SAI143
SAV144
SAI533
connection 1
connection meets standards
IEC 60603-13 (compliance)
Connection Mode
Yokogawa,I/O card compatible
connection quantity
1
Bits
40
Tightening torque
0.5 Nm (screw connection)
Insertion/unplugging cycle
> 50
needle pitch
2.54mm
Connection 2
connection meets standards
IEC 60603-13 (compliance)
Connection Mode
Yokogawa,KS Compatible
connection quantity
1
Bits
40
Tightening torque
0.5 Nm (screw connection)
Insertion/unplugging cycle
> 50
needle pitch
2.54mm
cable
length
10 m
40X0.14 [PVC]
UL AWM
2464/1061
Bits
40
Shielding
have
Cable Type
40X0.14 [PVC]
Wire Model
prefabricated circular shielded cable
wire structure signal line
7x 0.16mm
AWG, signal wire
26
Wire Cross Section
40x 0.14 mm²
wire diameter, including insulation
1 mm ± 0.03mm
Cable outer diameter
9.80mm ± 0.3mm
outer sheath, material
semi-rigid PVC
outer sheath, color
Grey
Wire Material
tinned copper stranded wire
Cable resistance
≤ 145 Ω/km (at 20°C)
insulation resistance
≥ 20 MΩ*km (20 °C)
minimum bending radius, fixed mounting
101mm
minimum bending radius, mobile installation
182mm
Dynamic Load Capacity (Bending)
Maximum bending times: 5000 (radius ≥ 18x outer diameter)
2314299
넳넲
Phoenix FLK 40-PA/EZ-DR/KS/1000/YUC-Card Front Adapter 2314370
